CCIE笔试大纲 Written Exam Blueprint v3.0

2008-07-23 19:11:10

CCIE ROUTING AND SWITCHING TRACK

Written Exam Blueprint v3.0

The Routing and Switching written exam (#350-001) has 100 multiple-choice questions and is two hours in duration. The topic areas listed are general guidelines for the type of content that is likely to appear on the exam. Please note, however, that other relevant or related topic areas may also appear.

General Networking Theory
1. General Routing Concepts
  1. Link State and Distance Vector Protocols
  2. Split Horizon
  3. Summarization
  4. Classful and a Classless routing protocol
  5. Routing decision criteria
2. Routing Information Base (RIB) and Routing Protocols Interaction
  1. Administrative Distance
  2. Routing Table
  3. RIB and Forwarding Information Base interaction
3. Redistribution
  1. Redistribution between routing
  2. Troubleshooting routing loop
Bridging and LAN Switching
1. Spanning Tree Protocol (STP)
  1. 802.1d
  2. 802.1w
  3. 802.1s
  4. Loopguard
  5. Rootguard
  6. Bridge Protocol Data Unit (BPDU) Guard
  7. Storm Control
  8. Rapid Spanning Tree Protocol (RSTP)
  9. Unicast flooding
  10. STP port roles, failure propagation and loopguard operation
2. LAN Switching
  1. Trunks
  2. VLAN Trunking Protocol (VTP) administrative functions
3. Ethernet
  1. Speed
  2. Duplex
  3. Ethernet
  4. Fast Ethernet
  5. Gigabit Ethernet
IP
1. Addressing
  1. Subnetting
  2. Hot Standby Routing Protocol (HSRP)
  3. Gateway Load Balancing Protocol (GLBP)
  4. Virtual Router Redundancy Protocol (VRRP)
  5. Network Address Translation (NAT)
2. Services
  1. Network Time Protocol (NTP)
  2. Dynamic Host Control Protocol (DHCP)
  3. Web Cache Communication Protocol (WCCP)
3. Network Management
  1. Logging and Syslog
IP Routing
1. OSPF
  1. Standard OSPF area
  2. Stub area
  3. Totally stub area
  4. Not-so-stubby-area (NSSA)
  5. Totally NSSA
  6. Link State Advertisement (LSA) types
  7. Adjacency on a point-to-point and on a multi-access (broadcast)
  8. OSPF graceful restart
  9. Troubleshooting failing adjacency formation to fail
  10. Troubleshooting of external route installation in the RIB
2. BGP
  1. Protocol on which BGP peers communicate
  2. Next Hop
  3. Peering
  4. Troubleshooting of BGP route that will not install in the routing table
3. EIGRP
  1. Best path
  2. Loop free paths
  3. EIGRP operations when alternate loop free paths are available and when it is not available
  4. EIGRP queries
  5. Manual summarization
  6. Auto-summarization
  7. EIGRP Stubs
  8. Troubleshooting of EIGRP neighbor adjacencies
4. Policy Routing
  1. Concept of policy routing
QoS
1. Modular QoS command-line (MQC) applied to:
  1. Network-Based Application Recognition (NBAR)
  2. Class-based weighted fair queueing (CBWFQ) / Modified Deficit Round Robin (MDRR)
  3. Policing
  4. Shaping
  5. Marking
  6. Random Early Detection (RED)
WAN
1. Frame Relay
  1. Local Management Interface (LMI)
  2. Traffic Shaping
  3. HUB and Spoke routers
  4. Dynamic Multipoint VPN (DMVPN)
  5. DE
IP Multicast
1. Internet Group Management Protocol (IGMP) v2
2. Group addresses
3. Shared Trees
4. Source Trees
5. Protocol Independent Multicast (PIM) Mechanic
6. PIM Sparse Mode
7. Auto-RP
8. Anycast RP
Security
1. Extended IP access lists
2. Unicast Reverse Path Forwarding (uRPF)
3. IP Source Guard
4. Context Based Access Control (CBAC)
MPLS (New)
1. Label Switching Router (LSR)
2. Label Switched Path (LSP)
3. Route Descriptor
4. Label Format
5. Label imposition/disposition
6. Label Distribution
IPv6 (New)
1. IPv6 Addressing and types
2. IPv6 Neighbor Discovery
3. Basic IPv6 functionality protocols
4. IPv6 Multicast and related Multicast protocols
5. Tunneling Techniques
6. OSPFv3
7. EIGRPv6

本文出自 “隐形的翅膀” 博客，请务必保留此出处http://prettyboy.blog.51cto.com/331557/89205

昵称：
验证码：		点击图片可刷新验证码　　博客过2级，无需填写验证码
内容：